FPD-7024 Family Fire alarm control panels

FPD-7024 Family Fire alarm control panels
  • Four initiating zones (expandable to eight) with up to 20 two‑wire smoke detectors per zone
  • Programmable through keypads or remote programming software (RPS) through a Conettix interface module or over the public switched telephone network (PSTN)
  • Two notification appliance circuits (NACs) on board with a shared internal regulated 24 VFWR, 4 A NAC power supply
  • Easily converts to addressable with the addition of a MUX expansion module
  • Reports to two phone numbers, two IP addresses, or a phone number and an IP address
 

Product variants

FPD-7024 Fire panel, 4-zone 24V, red enclosure

It has four detector zones (expandable to eight) with up to 20 two-wire smoke detectors per zone. It has two NACs on board with a shared internally-regulated 24 VFWR, 4 A NAC power supply. It communicates over phone or IP communication circuits.

Commercial Type No.: FPD-7024
Product No.: F.01U.008.460

 

Accessories

B426 Ethernet Communication Module

B426 Ethernet Communication Module

Supports two-way communications over Ethernet networks for compatible control panels

Commercial Type No.: B426
Product No.: F.01U.324.383

 
B450 Plug-in Communicator Interface

B450 Plug-in Communicator Interface

Supports two-way IP communications using plug-in cellular communicators for compatible control panels

Commercial Type No.: B450
Product No.: F.01U.323.797

 
 
D126 Battery, 12V 7Ah

D126 Battery, 12V 7Ah

A rechargeable sealed lead‑acid power supply used as a secondary power supply or in auxiliary or ancillary functions.

Commercial Type No.: D126
Product No.: 4.998.125.825

 
D7030X Annunciator, 8 alarm LED

D7030X Annunciator, 8 alarm LED

Eight zone LEDs indicate alarm conditions.

Commercial Type No.: D7030X
Product No.: 4.998.800.536

 
 
D7030X-S2 Annunciator, 8 LED (2 supervisory)

D7030X-S2 Annunciator, 8 LED (2 supervisory)

Two LEDs indicate supervisory conditions, six indicate alarm conditions.

Commercial Type No.: D7030X-S2
Product No.: 4.998.140.386

 
D7030X-S8 Annunciator, 8 LED (8 supervisory)

D7030X-S8 Annunciator, 8 LED (8 supervisory)

All eight zone LEDs (yellow) indicate supervisory conditions.

Commercial Type No.: D7030X-S8
Product No.: 4.998.140.387

 
 
D7032 Annunciator expander, 8 LED

D7032 Annunciator expander, 8 LED

Use with D7030X Family LED annunciators

Commercial Type No.: D7032
Product No.: 4.998.140.388

 
D7035 Multiplex octal relay module

D7035 Multiplex octal relay module

Provide eight Form C relay outputs (w/o enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Commercial Type No.: D7035
Product No.: 4.998.800.539

 
 
D7035B Multiplex octal relay module + enclosure

D7035B Multiplex octal relay module + enclosure

Provide eight Form C relay outputs (with enclosure) for the D7024, FPD-7024, or FPA‑1000 Fire Alarm Control Panels (FACP)

Commercial Type No.: D7035B
Product No.: 4.998.800.540

 
D7039 Multiplex expansion module

D7039 Multiplex expansion module

The D7039 enhances the conventional features of the D7024 or FPD‑7024 FACPs by increasing the number of addressable points to 256, the number of relay outputs to 58 on the D7024 or 59 on FPD‑7024, the number of events on the history buffer to 499, and the number of users to 100.

Commercial Type No.: D7039
Product No.: 4.998.800.529

 
 
D7042 Remote module, 8-input class B

D7042 Remote module, 8-input class B

Board and plastic enclosure with spring tamper

Commercial Type No.: D7042
Product No.: 4.998.800.552

 
D7042B Multiplex module, metal, 8-input

D7042B Multiplex module, metal, 8-input

Board on mounting plate with metal enclosure

Commercial Type No.: D7042B
Product No.: 4.998.140.390

 
 
D7044 Multiplex single-input module, 12V

D7044 Multiplex single-input module, 12V

The module connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400 FACP. The module draws supervised input power from the FACP for use in a Class B configuration. Rotary switches allow convenient address setting.

Commercial Type No.: D7044
Product No.: 4.998.800.545

 
D7044M Multiplex mini single-input module, 12V

D7044M Multiplex mini single-input module, 12V

Connects a normally‑open (NO) contact to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACPs.

Commercial Type No.: D7044M
Product No.: 4.998.800.546

 
 
D7050 Multiplex smoke head

D7050 Multiplex smoke head

The symmetry of the D7050’s optical chamber allows 360° uniform smoke entry, but minimizes external light entry. Within the chamber, large smoke particles scatter infrared light which is detected by a gated, high-speed, photodiode sensor.

Commercial Type No.: D7050
Product No.: 4.998.140.391

 
D7050TH Multiplex detector head, fixed heat

D7050TH Multiplex detector head, fixed heat

The D7050TH has an optical smoke chamber and a 35°F (57°C) fixed-temperature sensor. Use it in confined areas where a fire increases air temperature slowly but substantially before the fire breaks confinement.

Commercial Type No.: D7050TH
Product No.: 4.998.140.394

 
 
D7050-B6 Multiplex base, 2-wire

D7050-B6 Multiplex base, 2-wire

Required base for the D7050 and D7050TH MUX smoke heads

Commercial Type No.: D7050-B6
Product No.: 4.998.140.392

 
D7052 Multiplex dual-input module, 12V

D7052 Multiplex dual-input module, 12V

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP

Commercial Type No.: D7052
Product No.: 4.998.800.549

 
 
D7053 Multiplex input/output module, 12V

D7053 Multiplex input/output module, 12V

Connects normally‑open (NO) contacts to the multiplex bus of an FPD‑7024, D7024, or DS9400M FACP in configures as either Class A or Class B configuration

Commercial Type No.: D7053
Product No.: 4.998.800.550

 
DX4010V2 USB/serial interface module

DX4010V2 USB/serial interface module

Provides a local connection between compatible control panels and approved applications.

Commercial Type No.: DX4010V2
Product No.: F.01U.080.969

 
 
FMM-7045 Multiplex manual station, single, red

FMM-7045 Multiplex manual station, single, red

The single‑action manual station is UL listed and meets Americans with Disabilities Act (ADA) requirements. An address on the polling circuit is easily set with rotary switches. The pull-down handle locks in the activated position. It is reset by opening the unit with a key and then relocking it.

Commercial Type No.: FMM-7045
Product No.: F.01U.001.461

 
FMR-7033 LCD annunciator and control keypad

FMR-7033 LCD annunciator and control keypad

Combines remote annunciator and controller functions for fire alarm systems controlled by an FPD‑7024 Fire Alarm Control Panel

Commercial Type No.: FMR-7033
Product No.: F.01U.009.157

 
 
FMR-7036 LCD annunciator keypad

FMR-7036 LCD annunciator keypad

Four‑wire LCD annunciator keypad used with the FPD‑7024 Fire Alarm Control Panel to establish the location of a fire alarm

Commercial Type No.: FMR-7036
Product No.: F.01U.009.156

 
FPC-7034 IDC expander, 4-point

FPC-7034 IDC expander, 4-point

The FPC‑7034 adds four Class B or two Class A initiating circuits to the FPD‑7024 FACP. This plug‑in module is automatically recognized by the control panel's firmware when power is restored to the system.

Commercial Type No.: FPC-7034
Product No.: F.01U.003.861

 
 
FPE-7039 Multiplex expansion module for FPD-7024

FPE-7039 Multiplex expansion module for FPD-7024

It enhances the features of the FACPs. It increases the number of addressable points to 247. It increases the number of relay outputs to 58 on the D7024/DS9400 or 59 on the FPD‑7024. It increases number of events on the history buffer to 499.

Commercial Type No.: FPE-7039
Product No.: F.01U.299.029

 
FPP-RNAC-8A-4C Power supply, RNAC 8A 24V

FPP-RNAC-8A-4C Power supply, RNAC 8A 24V

When connected to a panel’s option bus, the FPP-RNAC-8A-4C adds four additional NFPA 72, Class B or Class A NACs. When connected directly to the NAC output, it is also a NAC power supply for fire-protective signaling systems.

Commercial Type No.: FPP-RNAC-8A-4C
Product No.: F.01U.003.444

 
 
ITS-DX4020-G GPRS/GSM integrated communicator

ITS-DX4020-G GPRS/GSM integrated communicator

Digital cellular communicator used for two-way IP or dialed communications over GPRS/GSM networks.

Commercial Type No.: ITS-DX4020-G
Product No.: F.01U.082.094