EOL: D7024‑EXP Fire Alarm Control Panels

D7024‑EXP Fire Alarm Control Panels
  • Four detector zones (expandable to eight); up to 20 two‑wire smoke detectors per zone
  • Built-in DACT
  • Two notification appliance circuits (NACs) on board with an internal 24 VFWR, 4 A NAC power supply
  • Easily converts to addressable with the addition of a D7039 Multiplex Expansion Module
  • Programmable through front panel interface, remote D7033 Liquid‑crystal Display (LCD) Keypads, or remote programming software (RPS)
  • Details
    Temperature (operating): 0°C to +49°C
    Color: Red
    Dimensions (H x W x D): 52.8 cm x 38.1 cm x 10.9 cm
    Material: Cold-rolled steel Base: 1.2 mm Cover: 1.1 mm
    NAC: 24 VFWR nominal, 4 A maximum
    On-board Relays: Two Form C contacts rated at 5 A, 28 VDC
    Off-board Relays: Up to two D7035 Octal Relay Modules each providing eight Form C relay outputs; contacts rated at 5 A, 28 VDC In an addressable system, up to 20 D7053 Multiplex Input‑Output Modules per bus for a total of 40
    Current (alarm): 380 mA
    Current (standby): 200 mA
    Power (primary) 220 VAC, 1.5 A maximum, 50 Hz
    Current: 44 mA maximum per loop
    Line resistance: 150 Ω
    Voltage: 24 VDC nominal
    Chamber Check® is a registered trademark of Bosch Security Systems, Inc. in the United States.
    CleanMe® is a registered trademark of GE Interlogix in the United States and/or other countries.
    Wheelock™ is a trademark of Wheelock, Inc.
    Gentex™ is a trademark of Gentex Corporation.


  • Documents (2)