FCP‑500 Conventional Flush‑mount Smoke Detectors

FCP‑500 Conventional Flush‑mount Smoke Detectors
  • Modern, ultra-low profile design
  • Color inserts match the surrounding decor
  • Smooth, easily-cleaned detector surface
  • Innovative retention mechanism
  • High reliability
  • Four-wire technology (six‑conductor wire)
  • Compatible with 12 VDC or 24 VDC systems
  • 30 ft (9 m) spacing between detectors
  • Optional carbon monoxide (CO) sensor for false alarm reduction
  • Dual color LED
  • FCA-500-E Base with integrated end-of-line(EOL) relay
  • Details
    FCP‑500(‑P): Scattered light measurement
    FCP‑500‑C(‑P): Combination of scattered light measurement and CO algorithm
    All FCP‑500 detectors: Drift compensation for smoke sensor baseline (optical sensors)
    Air Speed 300 ft/min (1.5 m/s) maximum
    Humidity 95% (non-condensing)
    Interference Immunity: According to UL 268
    Operating Temperature +32 °F to +100 °F (0°C to +38°C)
    Protection Category: FAP‑500(‑C): IP 53 FAP‑500(‑C)‑P: IP 33
    Color:
    Detector Housing: White
    Detector Front Plate: FCP-500(-C): white FCP-500(-C)-P: transparent (color inserts)
    Dimensions (diameter x D)
    Detector: 4.5 in. x 2.2 in. (11.4 cm x 5.6 cm)
    Detector with Trim Ring: 5.9 in. x 2.2 in. (15 cm x 5.6 cm)
    Detector with Trim Ring and Base: 5.9 in. x 2.75 in. (15 cm x 7 cm)
    Material: Polycarbonate
    Area Monitored: Refer to NFPA 72 Guideline
    Mounting Height: Maximum: Refer to NFPA 72 Guidelines Minimum: 9 ft (2.7 m)
    False Ceiling
    Clearance (minimum): 6 in. (15.2 cm) with tolerances of -0.0625 in. (1.6 mm) and +0.1875 in. (4.8 mm)
    Mounting Hole: 5.0625 in. (12.9 cm)
    Thickness (maximum): 1.25 in. (3.2 cm)
    Alarm
    Output: Alarm output through normally-open (NO) relay in FCA­‑500 base. An alarm resistance of 0 Ω or 680 Ω in series to the relay can be chosen.
    Relay Rating: 1 A at 30 VDC
    Reset Time The detector resets if power is interrupted for at least 2 sec.
    Display
    Two-color LED: Red = alarm, green = test mode, normal
    Remote LED: Normally-open (NO) relay connects ground through 1.5 kΩ, 20 mA maximum
    Trouble
    Output: Trouble output through normally-closed (NC) relay in FCA-500 base
    Relay Rating: 1 A at 30 VDC
    Current Consumption
    FCA­‑500 Base Alarm: 47 mA Standby: 3.5 mA
    FCA‑500‑E Base Alarm: 47 mA Standby: 24 mA
    Operating Voltage
    Four‑wire: 9.7 VDC to 30 VDC

    Images

     
  • Certificates (5)
    Title Type Language
    UL PDF
    CSFM PDF
    MSFM PDF
    NYC-MEA PDF
    HKFSD PDF
     
  • Documents (3)
     
 

Product variants

FCP-500-C Flush detector head, multisensor, white

Photoelectric smoke detector (white) with CO sensor; requires base.

Commercial Type No.: FCP-500-C
Product No.: 4.998.150.703

 

Accessories

FCA-500 Four-wire Base

FCA-500 Four-wire Base

Standard four‑wire base for FCP‑500 Detectors

Commercial Type No.: FCA-500
Product No.: 4.998.151.300

 
FCA‑500‑E Four‑wire EOL Base

FCA‑500‑E Four‑wire EOL Base

Supervised (EOL resistor included) four‑wire base for FCP‑500 Detectors

Commercial Type No.: FCA-500-E
Product No.: 4.998.151.301

 
 
FAA‑500‑BB-UL Ceiling‑mount Back Box for US

FAA‑500‑BB-UL Ceiling‑mount Back Box for US

A UL Listed back box for flush-mounting FCP-500 detectors on drop ceilings.

Commercial Type No.: FAA-500-BB-UL
Product No.: F.01U.510.767

 
FAA-500-TR-W Trim ring, white

FAA-500-TR-W Trim ring, white

for 500 and 520 Series Fire Detectors

Commercial Type No.: FAA-500-TR-W
Product No.: 4.998.151.295

 
 
FAA-500-TR-P Trim ring, colored

FAA-500-TR-P Trim ring, colored

for 500 and 520 Series Fire Detectors

Commercial Type No.: FAA-500-TR-P
Product No.: 4.998.151.296

 
FAA-500-RTL Removal tool

FAA-500-RTL Removal tool

for Detectors of the 500 and 520 Series

Commercial Type No.: FAA-500-RTL
Product No.: F.01U.508.720

 
 
FAA-500-TTL Test adapter with magnet

FAA-500-TTL Test adapter with magnet

The FAA‑500‑TTL Test Adapter is placed on the SOLO330 Smoke Detector Tester. It serves to test detectors in the 500 and 520 Series.

Commercial Type No.: FAA-500-TTL
Product No.: F.01U.508.725

 
DRA-5 Remote indicator plate, 5V

DRA-5 Remote indicator plate, 5V

Provides remote annunciation of alarms for a number of Bosch smoke and heat detectors

Commercial Type No.: DRA-5
Product No.: 4.998.132.729